The electric motor and the compression unit of the VERONA compressors are coupled by POLY-V belts and conical hub cast iron pulleys, which ensure excellent performance and maximum reliability in all operating conditions.
All the Onair line compressors are equipped with a pumping unit from our parent company Termomeccanica.
A new type of radial electric fans is used in the VERONA compressor cooling system, which ensure high cooling performance of the machine and at the same time reduce its noise.
Up to 15 KW
Up to 15 bar
Up to 2000 l/min
The VERONA series compressors are available in a wide range of powers (from 2.2 to 15 kW) and pressures (8, 10 and 13 bar. On request, up to a maximum of 15 bar). Depending on the configuration and whether the inverter is present or not, the air delivery ranges from 185 to 2.270 l/min. The compressors can be configured in compressor only version, on tank (from 270 to 500 litres) or on tank with dryer.
Thanks to the use of highly efficient electric motors, the Onair compressors minimise energy consumption. The noise level of the machine is also low, thanks to a careful study of the cabin ergonomics and the use of a new type of radial electric fans.
PLUG & PLAY
The compact design of the VERONA compressors makes installation quick and easy. In fact, simply connect the machine to the power and pneumatic line and the compressor is immediately operational. Routine maintenance is easy, since all the internal mechanical parts can be easily accessed and inspected.
Thanks to the lifting bars placed on the base, the VERONA compressors can be easily handled.
The controller installed on the VERONA compressors is used to view and set the main operating parameters of the machine both via the integrated keypad and remotely, simply by connecting the compressor to a PC.
The graphic interface of this electronic board makes it possible to immediately view alarms, operation notifications and all information on maintenance.
The board is designed to control up to 4 compressors in “master-slave” mode.
By using a plug&play, wi-fi or cable configuration, it is also possible to control the compressor remotely by simply using a PC or tablet, thus considerably reducing the intervention times and costs.