The experience gained over the years and in several re-engineering and development processes, has made it possible to create a line of versatile compressors, suitable for any type of continuous use and industrial application requiring flexibility and large air flows.
Entirely designed and made in Italy, the sturdy construction of the MILANO compressors allows them to operate even in extreme climatic conditions.
The lubricated single-stage screw compression unit of the MILANO compressors is driven directly by an electric motor by means of a flexible joint. The direct transmission is undoubtedly an important benefit in machines of this power range, since it ensures maximum performance and reliability even in continuous service.
Up to 160 KW
Up to 10 bar
Up to 26600 l/min
The MILANO series compressors are available in a wide range of powers (from 18.5 to 160 kW) and pressures (8 and 10 bar. On request, up to a maximum of 15 bar). They can be configured in fixed or variable speed version (INV). Depending on whether the inverter is present or not, the air delivery ranges from 1.050 to 26.600 l/min.
Thanks to the use of highly efficient electric motors, the Onair compressors minimise energy consumption.
The noise level of the machine is also low, thanks to the use of a new type of radial electric fans and a careful study of the cabin ergonomics.
PLUG & PLAY
The compact design of the MILANO compressors makes installation quick and easy. In fact, simply connect the machine to the power and pneumatic line and the compressor is immediately operational. Routine maintenance is easy, since all the internal mechanical parts can be easily accessed and inspected.
The panel at the base and the compact dimensions of the MILANO compression control units make it possible to easily lift and transport them using a forklift or pallet truck.
The controller installed on the MILANO compressors is used to view and set the main operating parameters of the machine both via the integrated keypad and remotely, simply by connecting the compressor to a PC.
The graphic interface of this electronic board makes it possible to immediately view alarms, operation notifications and all information on maintenance.
The board is designed to control up to 4 compressors in “master-slave” mode.
By using a plug&play, wi-fi or cable configuration, it is also possible to control the compressor remotely by simply using a PC or tablet, thus considerably reducing intervention times and costs.